内插式真空管太阳能热水器热特性理论及实验研究

设计了一种内插式真空管热水集热器,通过对其能量转换、传输特性研究,建立了内插式真空管集热器的热特性分析模型,并对不同设计参数和气候条件对内插式真空管热特性的影响进行了分析。结果表明,设计的集热器理论热效率最大可达79.5%,但其受环境温度、集热器工作温度等影响较大。此外,设计了由14只内插式真空管组成的太阳能热水器,采用迟滞算法将热水温度控制在50～55℃,实验结果表明,样机系统的日热效率可达55.0%,样机输出热水近120 kg,具有较好的实用价值。     

Electric field dependence of ferroelectric stability in BiFeO3 thin films co-doped with Er and Mn

Bi_0.9Er_0.1Fe_1−xMn_xO₃ (BEFM_xO, x = 0.00–0.03) films are synthesized by a sol–gel technique. The BEFO film exhibits a conduction mechanism based on electron tunneling. The high applied electric field causes dissociation of the defect complex, and the resulting oxygen vacancies contribute to fake polarization. Consequently, the BEFO film has poor polarization stability at high applied electric fields. Coexistence of two phases (with space groups R3c:H and R3m:R) and reduced concentrations of oxygen vacancies and Fe²⁺ in BEFM_xO are achieved by co-doping with Er and Mn. The presence of bulk-based conduction in the BEFM_xO films then leads to ferroelectric domain switching contributing to the real polarization and to excellent ferroelectric stability. In addition, the BEFM_0.02O film shows a typical symmetrical butterfly curve, the highest remnant polarization of ~109 μC/cm², and the highest switching current of ~1.66 mA. It also has the smallest oxygen vacancy concentration and thus the smallest amount of defect complex, which means that there are fewer pinning effects on ferroelectric domains and therefore excellent ferroelectric stability. This excellent ferroelectric stability makes the BEFM_xO films obtain good stability and reliability in the application of ferroelectric memory devices.     

基于改进ReaxFF 力场的全氟己酮热分解机理研究

采用基于密度泛函的紧束缚模型（DFTB）和改进的反作用力场（ReaxFF）对全氟己酮的热分解机理进行反应分子动力学仿真研究，分析了热分解的初始反应路径、微观反应过程以及体系内气体的生成机理，探讨了温度对全氟己酮热分解的影响，建立了以仿真数据为基础的一级动力学方程并对热分解过程进行一级动力学评估。结果表明，全氟己酮热分解的起始反应为：全氟己酮→全氟异戊烷+一氧化碳，全氟己酮热分解的主要产物为一氧化碳、四氟甲烷、六氟丙烯、全氟异丁烯、十氟丁烷、全氟异戊烷及大量活性基团。经一级动力学评估得到指前因子和表观活化能分别为5.021 7×1014 s-1和1 771.96 kJ/mol。     

助燃空气对乙烯裂解炉NOx排放的影响

乙烯裂解炉内复杂物理化学过程耦合模拟与优化能够满足乙烯装置对高效率、低污染和低成本的设计和操作要求，对提高乙烯工业的竞争力具有重要意义。针对简单燃烧机理难以准确预测炉膛燃烧生成NO_x浓度分布的弊端，提出了在裂解炉使用更准确的简化GRI-Mesh 3.0机理结合涡耗散概念(EDC)模型的方法，并对Sandia Flame D的燃烧过程进行计算流体力学(CFD)模拟，验证了此耦合模型的可靠性。在已建立的燃烧模型的基础上，研究了助燃空气对降低裂解炉NO排放的影响，结果表明：在满足裂解炉热效率的情况下，空气预热温度为300~600 K、过量空气系数为1.1时降低NO的效果最佳。     

TRIZ理论在集装箱吊具旋锁机构中的设计应用

利用TRIZ理论,采用因果分析现有结构中缺陷与不足产生的原因。在分析了整个集装箱吊具旋锁机构的系统组件模型后,利用因果分析寻找产生的原因。针对不同的问题采用不同的TRIZ解题工具分别运用技术矛盾、物质—场分析、进化分析对旋锁机构进行创新方案的设计。     

Numerical study of a concept for major repair and replacement of offshore wind turbine blades

Repair and replacement of offshore wind turbine blades are necessary for current and future offshore wind turbines. To date, repair activities are often conducted using huge jack‐up crane vessels and by applying a reverse installation procedure. Because of the high costs associated with installation and removal of offshore wind turbine components and the low profit margin of the offshore wind industry, alternative methods for installation and removal are needed. This paper introduces a novel concept for replacement or installation of offshore wind turbine blades. The concept involves a medium‐sized jack‐up crane vessel and a tower climbing mechanism. This mechanism provides a stable platform for clamping, lowering, and lifting of a blade. A case study of a 5‐MW offshore wind turbine is shown, where common engineering practices were applied and numerical simulations of the marine operations were carried out using finite element and multibody simulation tools. Operational limits for wave and wind actions were established to demonstrate the technical feasibility of the proposed concept.     

铸态Ti-20Zr-20Al钛合金动态压缩力学性能与断裂机制研究

采用X射线衍射仪、金相显微镜、分离式霍普金森杆和扫描电镜等手段研究了Ti-20Zr-20Al钛合金在动态压缩条件下的微观结构、力学性能和断裂机制。结果表明,Ti-20Zr-20Al铸态合金由Zr基体相和TiAl/Ti₃Al针状相组成; 随着应变率增加,合金的抗压强度增加,失效应变显著增加; Ti-20Zr-20Al合金的断裂机制为解理断裂; 随着应变率增加,试验压缩断裂后碎片总数增大,平均粒径减小。采用DID模型模拟的材料碎片尺度与实验结果比较吻合,Grady模型与实验结果的偏差较大。     

摆杆式导叶调节机构的设计与研究

为促进变几何涡轮在航空发动机中的广泛应用,提高变几何涡轮的工作效率,设计了一种用于变几何涡轮的摆杆式导叶调节机构。采用Adams软件对导叶调节机构进行了运动学仿真研究,仿真结果验证了调节机构设计的可行性,通过仿真发现这样的导叶调节机构至少需采用3个作动筒同时驱动才能保证涡轮调节的精度要求。在Adams中对机构进行了参数化建模,利用参数化模型分析了尺寸误差和间隙对导叶转动精度的影响,并且以前十次仿真为例计算了调节机构导叶角度重复位置精度的可靠度。研究结果表明设计的导叶调节机构结构合理、可靠性高。     

低碳钢电弧熔覆增材层摩擦磨损及抗腐蚀性能

目的 针对低碳钢零件的破损失效采用TIG焊电弧熔覆增材制造工艺，研究低碳钢电弧熔覆修复使其达到再制造零件性能要求的可行性，为实现TIG焊修复应用提供保证。方法 通过TIG焊熔覆在低碳钢坡口处，对熔覆接头的显微组织进行分析，并测试修复后的增材层表面硬度性能。使用Nanovea Tribometer摩擦磨损仪和NanoveaPS50表面轮廓仪，对基体和增材层进行摩擦性能测试，并表征摩擦磨损后的表面形貌，探究磨损机理。采用电化学工作站对基体和增材层的腐蚀性能进行分析。结果 修复后的增材层显微硬度（220.17HV）高于基体且其摩擦性能和腐蚀性能优于基体，随着磨损载荷的增加，增材层的摩擦系数逐渐降低，磨损机制主要为磨粒磨损和粘着磨损。增材层表面组织均匀细小，在NaCl溶液中点蚀坑小且分散，增材层的腐蚀电流密度（1.8349×10-6 A/cm2）小于基体的腐蚀电流密度（6.5251×10-5 A/cm2），增材层表面的抗腐蚀能力明显提高。结论 电弧熔覆低碳钢可满足低碳钢零部件现场电弧快速修复对再制造性能的要求，实现了低碳钢破损零部件的表面修复与强化。     

Flotation performance and adsorption mechanism of novel 1-(2-hydroxyphenyl)hex-2-en-1-one oxime flotation collector to malachite

A novel collector 1-(2-hydroxyphenyl)hex-2-en-1-one oxime (HPHO) was synthesized from 2-hydroxy acetophenone and butyraldehyde. Its flotation performance and adsorption mechanism to malachite were investigated by flotation test, zeta potential, Fourier transform infrared (FTIR) and X-ray photoelectron spectroscopy (XPS) analysis techniques. Compared with benzohydroxamic acid (BA), 1-(2-hydroxyphenyl)ethan-1-one oxime (HPEO) and sodium isobutyl xanthate (SIBX), HPHO exhibited excellent collecting power to malachite without additional reagents, such as Na₂S regulator and methyl isobutyl carbinol (MIBC) frother. Results of zeta potential indicated that HPHO was coated on malachite surfaces through a chemisorption process. FTIR and XPS data gave clear evidence for the formation of Cu–oxime complex on malachite surfaces after HPHO adsorption through the linkage between C=C, –OH, N–OH group and Cu species.